FEL-TECH Hammer Division has opened our web site named hammerrepair.com to all contractors, construction companies and project supervisors. Many contractors have asked if they can buy hydraulic hammer parts from FEL-TECH Hammer Division directly without using our distributors.


United States Location

 

FEL-TECH Hammer Division
1 Pullman Street
Worcester, Massachusetts 01606
508-552-0023

 

 


“THE CONTRACTORS CHOICE FOR REBUILT HAMMERS”

THE LARGEST HYDRAULIC HAMMER WEAR PARTS CENTER IN THE WORLD


Fel-Tech Hammer Division is an international leader in hydraulic hammer construction, maintenance, repair, and sales. Fel-Tech’s hallmark is a pursuit of excellent and a strong desire to provide the best possible customer service and support to all of our clients. We know that each individual client, big or small, has specific needs when it comes to their hydraulic hammer and we strive to go beyond what you would expect from a hammer provider. Everyone in the Fel-Tech family is treated equally.

Your hydraulic breakers are a cornerstone for your business and your satisfaction is a cornerstone of ours. We are equipped to take care of all your rock breaker needs. From sales to accessories, maintenance and support – Fel-Tech had no equal. Each rock breaking hammer, part or accessory we sell comes with the service that only Fel-Tech can offer.

We offer the largest selection of hydraulic hammer replacement parts in the world. Fel-Tech Hammer Division offers upper bushings, lower bushings, pistons and tie bars. We also offer the largest selection of seal kits, tool retainers, diaphragms and many other internal parts for your hydraulic hammer or hydraulic breaker.

We are not shy about showing off our superior products! Browse our site to see not only the excellent rock breaking hammers and part we offer, but the process we use that makes them the best on the planet. Interested in what Fel-Tech has to offer? Contact our sales department today!


FEL-TECH Hammer Division offers replacement parts for the following brands of hydraulic hammers


ALLIED DONSEO KOMAC RHINO
ALL-KOR ELLIS KOMATSU ROCKBLASTER
A’ONE FURUKAWA KRUPP ROCKMASTER
ARROWHEAD GHB KUBOTA ROCKRAM
ATLAS GB LIFTON SCHAEFF
BOBCAT GEHL MAGNUM SEBA
BTI HANWOO MJB SOCOMEC
CAT HUSKIE MONTABERT SOOSAN
CHICAGO HYDRO KAHN NPK STANLEY
CMB INDECO TRAMAC TAKEUCHI
CONTECH JCB OKADA TELEDYNE
D&A JOHN DEERE OKB TEREX
DAEYA KENT OKTECH TOKU
DB TECH KHB RAMCO TRAMAC

 


FEL-TECH Hammer Division always has over 150 pistons in stock for immediate delivery. Our pistons are high grade quality steel, unlike the Korean or Chinese pistons. Hydraulic hammer pistons CANNOT BE CHROME PLATED. Hydraulic hammer pistons CANNOT BE REPAIRED. Very simple physics do not support this thinking. Any attempt to repair a used piston can damage your cylinder and this may result in thousands of dollars in damage.


Our large hydraulic hammer parts supply allows us to sell daily to our customers and new customers. We also sell to our competition. As some OEM dealers and competitors have decided to lower their inventory, they now depend on FEL-TECH Hammer Division for many of their replacement hydraulic hammer parts. You can be sure your buying power will be at its best. We offer hydraulic breaker wear parts that are out of production, and hard to find parts.
Our hydraulic hammer piston supply is the largest collection of pistons ever stored at one facility for hundreds of different models of hydraulic hammers and hydraulic breakers. FEL-TECH Hammer Division offers hard to find pistons that the OEM dealers and our competition sometimes cannot supply on time and on budget.


FEL-TECH Hammer Division is the largest source for all your upper and lower bushings for your hydraulic hammer and hydraulic breaker. Our upper and lower bushings are OEM and aftermarket. We also manufacture many hydraulic hammer versions of upper and lower bushings from our in house machine shop. We do not offer products that are made in China.
All hydraulic hammer and hydraulic breaker parts must have a certificate of origin before they enter our supply warehouse facility. FEL-TECH Hammer Division also has parts for most hydraulic hammers made in Korea and Italy.


We offer replacement upper and lower bushings for the following hammer brands


ALLIED DONSEO KOMAC RHINO
ALL-KOR ELLIS KOMATSU ROCKBLASTER
A’ONE FURUKAWA KRUPP ROCKMASTER
ARROWHEAD GHB KUBOTA ROCKRAM
ATLAS GB LIFTON SCHAEFF
BOBCAT GEHL MAGNUM SEBA
BTI HANWOO MJB SOCOMEC
CAT HUSKIE MONTABERT SOOSAN
CHICAGO HYDRO KAHN NPK STANLEY
CMB INDECO TRAMAC TAKEUCHI
CONTECH JCB OKADA TELEDYNE
D&A JOHN DEERE OKB TEREX
DAEYA KENT OKTECH TOKU
DB TECH KHB RAMCO TRAMAC

 

 

 

Our diaphragm supply is also the largest in the world. At FEL-TECH Hammer Division, we stock over 1,000 different diaphragms at all times for your hydraulic hammer and hydraulic breaker. We ship worldwide from our parts facility. Hydraulic hammer wear parts and superior service are our business.


FEL-TECH Hammer Division offers diaphragms and nitrogen fill valves for the following brands


We also offer free nitrogen refills for your accumulators. You may send your accumulator to FEL-TECH Hammer Division for a complimentary recharge. We also offer recharge kits for most brands.


 

ALLIED DONSEO KOMAC RHINO
ALL-KOR ELLIS KOMATSU ROCKBLASTER
A’ONE FURUKAWA KRUPP ROCKMASTER
ARROWHEAD GHB KUBOTA ROCKRAM
ATLAS GB LIFTON SCHAEFF
BOBCAT GEHL MAGNUM SEBA
BTI HANWOO MJB SOCOMEC
CAT HUSKIE MONTABERT SOOSAN
CHICAGO HYDRO KAHN NPK STANLEY
CMB INDECO TRAMAC TAKEUCHI
CONTECH JCB OKADA TELEDYNE
D&A JOHN DEERE OKB TEREX
DAEYA KENT OKTECH TOKU
DB TECH KHB RAMCO TRAMAC

 

 

 

FEL-TECH Hammer Division also has the world’s largest selection of tool retainers on site at all times. Our tool retainers are the best on the market because of the heat treating standards that our working partners have. Our heat treat facility is ISO certified. All hydraulic hammer tool retainers are certified for hardness and steel quality. Many Korean and aftermarket tool retainers are only case hardened. At FEL-TECH Hammer Division, our tool retainers are through hardened for longevity resulting in a much longer hourly use.


FEL-TECH Hammer Division offers tool retainers for the following hydraulic hammer brands


 

ALLIED DONSEO KOMAC RHINO
ALL-KOR ELLIS KOMATSU ROCKBLASTER
A’ONE FURUKAWA KRUPP ROCKMASTER
ARROWHEAD GHB KUBOTA ROCKRAM
ATLAS GB LIFTON SCHAEFF
BOBCAT GEHL MAGNUM SEBA
BTI HANWOO MJB SOCOMEC
CAT HUSKIE MONTABERT SOOSAN
CHICAGO HYDRO KAHN NPK STANLEY
CMB INDECO TRAMAC TAKEUCHI
CONTECH JCB OKADA TELEDYNE
D&A JOHN DEERE OKB TEREX
DAEYA KENT OKTECH TOKU
DB TECH KHB RAMCO TRAMAC

Warehouse Pictures 053.jpg

 

FEL-TECH Hammer Division stocks hydraulic hammer and hydraulic breaker tie bars and tie bar nuts for several brands. FEL-TECH Hammer Division also has a data base that contains tie bars for over 1,500 different models. With over 72,000 hydraulic hammer wear parts in our data base you can be certain that we can supply you with your hydraulic hammer parts on time and on budget.


FEL-TECH Hammer Division offers tie bars and cross bolts for the following hydraulic hammer brands

 

ALLIED DONSEO KOMAC RHINO
ALL-KOR ELLIS KOMATSU ROCKBLASTER
A’ONE FURUKAWA KRUPP ROCKMASTER
ARROWHEAD GHB KUBOTA ROCKRAM
ATLAS GB LIFTON SCHAEFF
BOBCAT GEHL MAGNUM SEBA
BTI HANWOO MJB SOCOMEC
CAT HUSKIE MONTABERT SOOSAN
CHICAGO HYDRO KAHN NPK STANLEY
CMB INDECO TRAMAC TAKEUCHI
CONTECH JCB OKADA TELEDYNE
D&A JOHN DEERE OKB TEREX
DAEYA KENT OKTECH TOKU
DB TECH KHB RAMCO TRAMAC


FEL-TECH Hammer Division also has over 1,000 hydraulic hammer seal kits in stock at all times

We stock most hydraulic hammer and hydraulic breaker seal kits for the following brands


 

ALLIED DONSEO KOMAC RHINO
ALL-KOR ELLIS KOMATSU ROCKBLASTER
A’ONE FURUKAWA KRUPP ROCKMASTER
ARROWHEAD GHB KUBOTA ROCKRAM
ATLAS GB LIFTON SCHAEFF
BOBCAT GEHL MAGNUM SEBA
BTI HANWOO MJB SOCOMEC
CAT HUSKIE MONTABERT SOOSAN
CHICAGO HYDRO KAHN NPK STANLEY
CMB INDECO TRAMAC TAKEUCHI
CONTECH JCB OKADA TELEDYNE
D&A JOHN DEERE OKB TEREX
DAEYA KENT OKTECH TOKU
DB TECH KHB RAMCO TRAMAC

 

 

FEL-TECH Hammer Division also offers American made and German made tools. We offer chisels, moil points, blunt points and all other tools for the demolition and rock breaking industry.


FEL-TECH Hammer Division offers tool steel for all your hydraulic hammer or hydraulic breaker needs

We offer chisels, moil points, blunt tools, tampers, cross cuts, pole tampers and many other designs for the following hydraulic hammer, rock breaking and mining industry brands


 

ALLIED DONSEO KOMAC RHINO
ALL-KOR ELLIS KOMATSU ROCKBLASTER
A’ONE FURUKAWA KRUPP ROCKMASTER
ARROWHEAD GHB KUBOTA ROCKRAM
ATLAS GB LIFTON SCHAEFF
BOBCAT GEHL MAGNUM SEBA
BTI HANWOO MJB SOCOMEC
CAT HUSKIE MONTABERT SOOSAN
CHICAGO HYDRO KAHN NPK STANLEY
CMB INDECO TRAMAC TAKEUCHI
CONTECH JCB OKADA TELEDYNE
D&A JOHN DEERE OKB TEREX
DAEYA KENT OKTECH TOKU
DB TECH KHB RAMCO TRAMAC

FEL-TECH Hammer Division also offers plumbing and wet kits for all hydraulic hammer carriers. Our wet kits are custom made for your specific machine.
All wet kits contain instructions that are very simple and will guide you through an easy installation.

 

 

Mounting Brackets are also offered by FEL-TECH Hammer Division for all machine styles and applications. Our state of the art CNC steel cutting table offers precise cutting up to 2.500” thick using A36 steel. We offer mig welding with wires up to .125”, and also stick welding. Our selection of bushings and bosses cannot be matched by any supplier in this business. We offer 4140 and 4150 polished pins up to 110 MM in diameter at any length. Our pins are offered with through center grease pilot holes to match your existing pin on your machine.

 

Rebuilding your hammer is always a very easy task for FEL-TECH Hammer Division. Your hammer must be cleaned and inspected first. After our full inspection, you will receive a complete report on our findings, along with an estimate. Your hammer must be rebuilt in a clean environment by trained professional technicians. If your hammer is not rebuilt by FEL-TECH Hammer Division, than it has not been rebuilt. At FEL-TECH Hammer Division, you will never get that call that says “We need more money” because we overlooked something during inspection.


 

Visit our web site at http://www.hammerrepair.com/

DUNS: 791063311  

DUNS PLUS4:   

CAGE/NCAGE Code: 4NE35  

Legal Business Name: FRANK E LASHUA INC  

Doing Business as (DBA): FEL-TECH  

Division Name: FEL-TECH Hammer Division 

Division Number 1-Massachusetts

Division Number 2 -California 

Company URL: fel-tech.com

Physical Street Address 1: 1 PULLMAN STREET     

Physical City: WORCESTER  

Physical State: MA  

Physical Zip/Postal Code: 01606  

Physical Country: USA