About Us
FOUNDED WITH ONE GOAL IN MIND
Quality control, with complete customer satisfaction, providing a genuine commitment to the end users of hydraulic hammers, is our goal. FEL-TECH Hammer Division has continually offered the most comprehensive rebuild system for
hydraulic hammers to date.
FEL-TECH Hammer Division is
"THE CONTRACTORS CHOICE FOR REBUILT HAMMERS"
At FEL-TECH Hammer Division we understand that the general contractor has specific needs and expectations. Contractors must start and complete a project on time with a set schedule. They have committed themselves to their customer and their customer expects completion on schedule.
Before FEL-TECH Hammer Division began rebuilding hydraulic hammers, we began our long and extensive research regarding the general and specialized applications concerning the use and the requirements of the hydraulic hammer. We spoke to general contractors from large companies, as well as local, small companies. We visited job sites and spoke to the operators that were using the attachments. We asked the correct questions.
In every case, we found the same answers
1. The contractor needed the hydraulic hammer to produce each and every time.
2. The operating cost must be at a minimum.
3. Any downtime must be very short.
4. A standard must be set for a fast economic return of the hammer to the contractor.
5. There should be a true rebuild company that not only performs hydraulic hammer rebuilds, but also has a complete machine shop in order to avoid long waiting periods for parts.
TIME IS MONEY.
FEL-TECH Hammer Division has set a new standard for hydraulic hammer rebuilding
Unlike hydraulic hammer manufactures and many hydraulic hammer rebuilding companies, FEL-TECH Hammer Division rebuilds all hydraulic hammer brands. This ability was acquired through broad hydraulic hammer research and requires extensive hydraulic hammer knowledge.
While researching various hydraulic hammer manufacturers, suppliers and shops, we felt there was no satisfactory hydraulic hammer standard or system in place that could be followed each and every time in order to achieve continued results when rebuilding all brands of hydraulic hammers. Although we knew that each hydraulic hammer had a different design and different internal parts, we also questioned why there was no standard hydraulic hammer rebuilding practice in place. Every hydraulic hammer rebuild shop had separate hydraulic hammer practices and techniques.
Which hydraulic hammer practice was correct?
Which rebuilding techniques offered the longest life on a hydraulic hammer?
Was the hydraulic hammer manufacturer's recommended way the best way?
From the time you place your call to FEL-TECH Hammer Division to the time your hydraulic hammer is returned back to the job site, you can be sure that a complete quality control system is in place that assures you that your hydraulic hammer has met all the requirements that make it a FEL-TECH quality rebuilt hydraulic hammer. FEL-TECH Hammer Division rebuilds using an extensive checklist that has been designed to certify that a quality control system is in place for pre-inspection, disassembly, cleaning, secondary inspection, reverse engineering, machining, parts replacement, heat treating and testing.
FEL-TECH Hammer Division also offers new ARROWHEAD Hydraulic Hammers with a 3 Year Warranty
Hydraulic hammer quality control is our standard.
Lower cost moderating is our practice.
Customer satisfaction is our goal.
Visit the largest hydraulic hammer data base in the world owned and operated by FEL-TECH Hammer Division
HAMMERREPAIR.COM©
sales@ubreakrock.com©
OVER 72,000 HYDRAULIC HAMMER PARTS IN OUR DATA BASE
THE WORLDS LARGEST HYDRAULIC HAMMER WEAR PARTS CENTER
A subsidiary of FEL-TECH Hammer Division
259 Brooks Street
Worcester, MA 01606
United States
Toll free 1-877-UBREAKROCK©
(1-877-827-3257)
SERVICE CENTER
508-552-0023
