At FEL-TECH Hammer Division, we take the time to look at our chisel paste in comparison to other chisel paste suppliers. We feel that our chisel paste will lower your wear parts cost year after year. Our extensive history of shipping high quality with chisel paste allows us to export full pallets of hydraulic hammer grease all around the world.
FEL-TECH chisel paste provides superior lubrication of hydraulic hammers. Our chisel paste is fortified with over 16% copper and graphite solids to provide excellent protection under extreme pressures and high temperatures. Chisel paste utilizes a calcium Sulfonate complex thickener. This thickener has excellent high temperature, extreme pressure, and heavy load carrying capabilities. The hydraulic hammer grease is then formulated with an ISO 460 Heavy Duty base oil to provide extra protection.
Our high temperature lubricant formulated to prevent excessive circumferential makeup. It assures full hydraulic joint efficiency by allowing joint shoulders to mate completely without standoff or deformation. It is formulated with an ISO 460 base oil to provide heavy load carrying capability. Then, the grease is fortified with 17%+ copper flakes and graphite solids to provide protection in the harshest environments. The high solid content provides dry film lubrication and anti-seize properties up to 1800°F.
You may be using a chisel paste that you have been told is “the very best”. It is estimated that using the incorrect chisel paste, can double and in some cases, triple the rebuild cost of your hydraulic hammer. You may be purchasing the chisel paste for a very good price. You also, may be paying a high cost for the chisel paste. Your supplier may have no idea what they are selling to you.
When any hydraulic hammer grease is selling in several countries by the full pallet, the grease and the company that sells it must be the very best. FEL-TECH Hammer Division is that company. Our goal is to keep you operational. Tools, bushings and pistons are very expensive. Take control of your wear parts cost and downtime today. Ask your FEL-TECH representative for more information today and lower your repair bills.
Recommended for the greasing of the tool and bushings on hydraulic hammers and breakers to prevent wear and extend life of the tool. Chisel Paste meets all OEM requirements for hydraulic hammer and hydraulic breaker lubrication. FEL-TECH Chisel Paste is one of the highest quality hydraulic hammer/breaker lubricants available.
- Fortified with copper and graphite
- Weld point score of 800
- Calcium Sulfonate Complex thickener (High Performance)
- Heavy duty ISO 460 base oil.
- Reduces friction and wear
- Long life
- Price competitive
- Dry film lubrication properties
FEL-TECH CHISEL PASTE provides superior lubrication of hydraulic hammers. Our chisel paste is fortified with over 16% copper and graphite solids and provides excellent protection under extreme pressures and high temperatures.
FEL-TECH CHISEL PASTE utilizes a calcium Sulfonate complex thickener. This thickener has excellent high temperature, extreme pressure, and heavy load carrying capabilities. Our grease is then formulated with a ISO 460 Heavy Duty base oil
to provide extra protection.
FEL-TECH CHISEL PASTE meets all OEM requirements for hydraulic hammer and hydraulic breaker lubrication. FEL-TECH Chisel Paste is one of the highest quality hydraulic hammer/breaker lubricants available.
FEL-TECH CHISEL PASTE also features an amazing 800 weld point score. The four ball EP (Extreme Pressure) test is a measurement of the load bearing capacity of grease, or in other words, the amount of pressure that a grease can withstand and still operate under. In the test, three ball bearings are coated with the grease to be tested, and the fourth ball bearing is rotated against the three stationary ball bearings. The amount of pressure (measured in kilogram force—Kgf) is increased, until at some point the grease fails to lubricate effectively, and the balls weld together. A higher weld point is an indication that the grease is able to withstand greater amounts of heat and pressure. 800 kg is the maximum score possible.
Technical Data Sheet
FEL-TECH CHISEL PASTE
- NLGI Grade 2
- Appearance Copper / Gray
- Thickener Type Calcium Sulfonate Complex
- Penetration Worked D 217 265 - 290
- Worked 10,000 - % change ± 5 MAX
- Dropping Point, min D 2265 570°F
- 4-Ball EP, weld point D 2596 800 kg
- 4-Ball Wear, Scar Dia, mm D 2266 0.39
- Corrosion Prevention D 1743 PASS
- Solids, Graphite & Copper 16%
- Base Oil Characteristics
- Viscosity @ 40°C, cSt 460
- Viscosity Index 95
- Flash Point, COC 465°F
- Dry Film Lubrication 1800 + °F