Hydraulic Hammer Brackets
Fel-tech Hammer Division produces high quality hydraulic hammer brackets. Our delivery time on hydraulic hammer brackets is very fast. We offer a 24 hour build time on our pin on brackets and, pin on brackets that are used with your quick coupler. Order your bracket or top cap and we “complete the build” the first day and normally ship on the second day.
When building a hydraulic breaker bracket we make your bracket at 80% complete with all the work that needs to be done. This saves time and money. Our brackets are spot welded and then put into inventory. Our bracket base plates do not have bolt holes in them. This allows us to make any fast changes to the upright plate location for width and matching your bolt pattern. We install the bolt pattern for the last step
Brackets now ready for final weld and base plate mounting holes
Our bushings are already in stock from 35 mm to 150 mm diameter
Our bushings, bosses, and pins are already made in over special size dimensions and ready for the last machining operation. This means we can undersize, oversize, shorten to size and then install right away.
Our hydraulic hammer bracket pins are already in stock from 35 mm to 150 mm diameter in extra-long lengths. This means we minimize your down time. We cut to length, drill your bolt hole in the desired location and then we ship.
When looking for the best quality hydraulic hammer brackets, look no further than the selection of hydraulic hammer brackets at Fel-Tech.com. With over 20 years’ experience in machining and designing quality hydraulic hammers and parts, you’re sure to be satisfied with the performance and durability of our top quality hydraulic hammers and hydraulic hammer brackets. Our hydraulic hammer brackets are designed just as tough as our hammers and are guaranteed to withstand even the hardest abuse.
Each of our hydraulic hammer brackets is guaranteed to have matching quality steel gussets that are designed to reinforce the interior center of your hydraulic hammer. With Fel-Tech’s hydraulic hammer brackets and steel gussets, your hammer is guaranteed to work at its highest potential. At Fel-Tech.com we not only carry the finest hydraulic hammer brackets and steel gussets, but also the hydraulic bushing that you need for your hammer. When it comes to hydraulic hammers and accessories, choose Fel-Tech.com. Contact Fel-Tech today for information on hydraulic hammer brackets, steel gussets, bushings, and pins..
FEL-TECH Hammer Division sells around the globe. You are invited to contact us in your preferred language
(english) email firstname.lastname@example.org
(Spanish) email email@example.com en su lengua
(Dutch) e-mail firstname.lastname@example.org in uw taal
(French) email email@example.com en votre langue
(German) email firstname.lastname@example.org in Ihrer Sprache
(Greek) ηλεκτρονικό ταχυδρομείοfrank@fel-tech.netστη γλώσσα σας
(Italian) email email@example.com in vostra lingua
(Korean) 너의 언어안에 전자 우편 firstname.lastname@example.org
(Portuguese) email email@example.com em sua lingual
(Russian) email firstname.lastname@example.org в вашем языке
FEL-TECH MANUFACTURES (4500-5500 LB ENERGY CLASS) HYDRAULIC HAMMER BRACKETS
CUSTOM MADE TO ORDER
WE SHIP WORLDWIDE WITH OUR SHIPPING DISCOUNTS
Pictures of hydraulic hammer brackets are a representation only for display purposes. Your hydraulic hammer bracket will be custom engineered, fabricated and painted according to your specific hammer dimensions, carrier design and weight, pin and bushing sizes and structural requirements.
FEL-TECH HYDRAULIC HAMMER BRACKETS
MANUFACTURED BY FEL-TECH HAMMER DIVISION IN THE UNITED STATES
FEL-TECH HYDRAULIC HAMMER DIVISION
“THE CONTRACTORS CHOICE FOR REBUILT HYDRAULIC HAMMERS” ™
Our Customer Comments
"This Bracket goes beyond our expectations and specifications"
U.S. Army Corps of Engineers (USACE)
"Our customer was so pleased with your Bracket he came back and ordered a 5000 lb hammer, Thank you!"
"Like our company, you have proven once again that high quality can have a lower cost"
Maverick Hydraulic Hammers
"We are now installing trenches for electrical lines in Saba, west Indies and our customer is very happy"
Saba, The bottom N. Antilli West Indies
"We received the hammer and the bracket was a perfect match, Thank you again"
FEL-TECH Hammer Division is affiliated with, or a member of the following organizations or agencies:
- National Demolition Association
- U.S. Trading Partner
- Central Contract Registry
- Defense Logistics Agency
- Business System Modernization Member
- Procurement Gateway System
- DIBBS Bidboard System
- Certified Massachusetts Construction Supervisor
CERTIFIED QUALITY CONTROL - WORLDWIDE CONTROLLED LOGISTICS SUPPLY AND DELIVERY SYSTEM - CUSTOM DESIGNED - AMERICAN MADE
FEL-TECH HAMMER DIVISION is known for high quality hydraulic hammer brackets with ranges from 300 lb class to 15,000 lb class and carrier (your machine) weights from 3000 lbs and up to 160000 lbs.
WE MANUFACTURE BRACKETS THAT WILL FIT THE FOLLOWING BRANDS
We also sell Hydraulic hammer parts for all brands of hydraulic hammers.
- Allied Street Hammer
- Atlas Copco
- Chicago Pneumatic
- CMB (Tasung)
- DB Tech
- GB Industries
- Hydro Khan
- John Deere
At FEL-TECH Hammer Division we have certified machinists with over 20 years experience in machining and designing. We produce high quality Brackets, bushings, bosses, pins and retaining rings that absolutely outlast the manufacturer’s designs. At FEL-TECH Hammer Division we take pride in our design practices and applications for all carriers and hydraulic hammers. Our hydraulic hammer brackets are simply the best on the market today because of the specialized steel that we custom order, the “cryogenic process” that we have developed and our 650 amp. flux core wire feed welding system. Because we understand steel and the properties of the treatment of steel after manufacturing, Our bushings and pins will outlast other manufacturers by 200% - 400% for longevity, shock absorption, energy displacement and wear. All of our hydraulic hammer brackets are custom made one at a time with a cost that is less than a manufacturers assembly line cost.
With our high quantity steel purchasing, we have kept our cost in line with your budget.
At FEL-TECH Hammer Division you may also lease your hydraulic hammer bracket.
At FEL-TECH Hammer Division we will always provide you with alloy polished pins in metric sizes from 35mm to 110mm. All pins are always matched to your bushings and sleeves with a “slip fit” for easy installation. We stock over 2,400 feet of metric size pins in our warehouse which allows us to always have your size in stock. At FEL-TECH we stock 35mm, 45mm, 50mm, 60mm, 70mm, 80mm, 90mm, 100mm and 110mm ground, polished and pre-hardened high quality stock from American suppliers around the country.
We do not use cold rolled steel which is a standard in many hydraulic hammer brackets.
"Ground and Polished alloy metric pins, alloy bushings with matching bosses and alloy shaft collars are simply a standard for FEL-TECH Hammer Division."
FEL-TECH Hammer Division produces and stocks over 1,000 bushings, bosses, hardened shims and shaft collars at all times. This stocking system allows us to supply you with the manufacturing and assembly logistics to provide you with any size hydraulic hammer bracket for any brand and style breaker regardless of your hydraulic hammer brand, style, year or size at THE ABSOLUTE BEST PRICE ON THE MARKET TODAY.
FEL-TECH Hammer Division produces and stocks over 1,000 bushings, bushing sleeves, hardened shims and shaft collars at all times. This stocking system allows us to supply you with the manufacturing and assembly logistics to provide you with any size hydraulic hammer bracket regardless of your hydraulic hammer brand, style, year or size at the absolute best price on the market today. When you order new pins or bushing for your existing bracket, FEL-TECH Hammer Division will ship your parts that same day providing you order is placed by 12:00 EST.
Our plate steel is always ordered to our exact specifications from American suppliers for unsurpassed longevity. At FEL-TECH Hammer Division all our plate steel is pre-drawn and pre-cut on our state of the art CNC cutting table to your exact specifications (+/- .015) for your hydraulic hammer. FEL-TECH Hammer Division stocks 1/2" - 3/4" - 1” - 1-1/4” and 1-1/2” plate steel in 5’ x 10’ sheets ready to be designed on our 2008 AUTO CAD System and cut on our state of the art cutting center.
Every hydraulic hammer bracket that FEL-TECH Hammer Division designs and builds will always have matching 3/4" - 1 1/2" steel gussets on the exterior faces depending on your hydraulic hammer bracket. With opposing reinforcements on the interior center, you can be sure that your FEL-TECH Hydraulic Hammer bracket will actually outlast the hammer that it is mounted to.
Our specialized PRE-HEAT FLUX CORE welding system allows us to create an unbreakable weld that will continue to keep your bracket in line at all x, y, and z coordinates as you use your hydraulic hammer at its full capacity.
We do not use cold rolled steel which is a standard in many hydraulic hammer brackets
"Ground and Polished alloy metric pins, Alloy bushings with matching bosses and alloy shaft collars are simply a standard for FEL-TECH Hammer Division."
The major advantages of flux-cored welding are reduced cost and higher deposition rates than either SMAW or solid wire GMAW. The cost is less for flux-cored electrodes because the alloying agents are in the flux, not in the steel filler wire as they are with solid electrodes. Flux-cored welding is ideal where bead appearance is important and no machining of the weld is required. A higher percentage of the filler metal is deposited when compared to shield metal arc welding. Finally, better penetration is obtained than from shielded metal arc welding.
At FEL-TECH Hammer Division, we pride ourselves in the fastest delivery time on the market today with the best price. From the time we receive your company information, hydraulic hammer specifications and carrier specifications we will always ship your bracket within a 5 day period, custom made in your choice of colors. Simply fill out our custom order sheet and your bracket is in production the same day. Your hydraulic hammer bracket will be shipped to you within a 5 day period. FEL-TECH Hammer Division also ships world wide.
At FEL-TECH Hammer Division, your hydraulic hammer bracket is warranted for 5 years against weld failure and distortion under normal use. As a customer of FEL-TECH Hammer Division, you are automatically qualified for a 10% discount on replacement pins and bushings after your purchase of a FEL-TECH Hydraulic Hammer Bracket.
ALL HYDRAULIC HAMMER CONTRACTORS AND DEALERS AROUND THE WORLD ARE WELCOME AT FEL-TECH HAMMER DIVISION
All customer "private label request", drawings, contracts, manufacturer design/ build applications are held confidential.
FEL-TECH Hammer Division welcomes all contractors and all dealers to try FEL-TECH Brackets, Bushings and Pins.
If you are a contractor or a dealer and have attempted building your own brackets you certainly understand the work and cost involved to produce a high quality bracket.
"IF YOU ARE A DEALER AND DON'T HAVE THE BRACKET, YOU COULD BE MISSING A SALE OF A HYDRAULIC HAMMER"
"IF YOU ARE A CONTRACTOR WITH A HAMMER THAT NEEDS A BRACKET, YOU COULD BE LOSING WORK"
If you are currently a dealer for a particular brand of hydraulic hammer and are having problems with your factory on delivery time, shipping cost and the unnecessary high cost of a hydraulic hammer bracket, you are always welcome at FEL-TECH Hammer Division. We offer “blind shipping” - “private labels” - "Color of choice" to all dealers. FEL-TECH Hammer Division also welcomes all private contractors that have recently purchased a hydraulic hammer from any dealer or an auction and have an urgent need for a hydraulic hammer bracket.
For More Information
Call FEL-TECH Hammer Division today at 508-552-0023 or email email@example.com
FEL-TECH Hammer Division manufactures and sells the following hydraulic hammer brackets, bosses, pins, and bushings for the following hydraulic hammers and many more. We will custom design a bracket for you for any hydraulic hammer that is not listed below.
Some models below may have side brackets with a built in mounting bracket as part of the side plates.
We offer new pins, bosses and bushings for these models also.
690 / HM 45
700 / HM 55
700 B / HM 60
711 B / HM 75
715 B / HM 140
725 B / HM 190
730 / HM 305
735 / HM 350
740 CS / HM 560
745 DS/CS / HM 580
750 CS / HM 720
755 CS / HM 780
770 CS / HM 960
775 CS / HM 1000V
785 CS / HM 1500
795 CS / HM 2000
805 CS / HM 2500
HM 2100 / 2300
HM 85 / HM 90 V
HBC 1100 / 1700 HD
HBC 4000 HD
SBC 115 / SB 100
SBC 255 / SB 150
SBC 400 / 410 / SB 200
SBC 60 / SB 50
SBC 610 / 650 / SB 300
SBC 800 / 850 / SB 450
TEX 100 / 100 H
TEX 1800 / 2000 H
TEX 250 H1
2500 / 2560 / 2570
3500 / 3560 / 3570
B 1200 / B 1400
B 600 / B 700
B 850 / B 950
BTI / TELEDYNE
TB 1425 X/1675 X
TB 425 CM/425 X/625 CM/625 X
TB 725 CM/725 X/825 X
TM 325 CM
TB 225 CM
TB 925 X/975 X
CAT H 100
CAT H 115
CAT H 120C
CAT H 130
CAT H 130C
CAT H 140
CAT H 140C
CAT H 160
CAT H 160C
CAT H 180
CAT H 195
CAT H 45
CAT H 50
CAT H 63
CAT H 70
CAT H 90
HB 12 / MES 1200
HB 19 / MES 1500
HB 27 / MES 2000
HB 5 / MES 451/521/550
MES 1800 / 1750
MES 621 / 650
HB 05 R
KF12 / F12
KF19 / F19
KF22 / F22
KF35 / F35
KF4 / F4
KF45 / F45
KF5 / F5
KF6 / F6
KF70 / F70
KF9 / F9
KHB 10G II / HD
KHB 15G II
KHB 20G II
KHB 2G II
KHB 30G II
KHB 3G II
KHB 40G II
KHB 50G II
KHB 5G II
KHB 8G II
M 125 SX
E-12-X / E-212
E-15-X / E-215
E-210 / E-210 B
E-213 / E-213 A
H-10-XB / H-10-XE
H-12-X / H-12-XE
H-16-X / H-16-XE
H-3-XA/XE / H-2-X
H-5-X / H-6-X
OHK 302 A
OHK 312 B
E 66 / E 66N (S 55)
S 23 / S 23N
S 26 / S 26N
S 54 (700/700S)
S 56 (800/800S)
S 82 (S 1400)
S 84 (S 1600)
S 86 (S 2000)
SH 85 / SH 95
SB 10 TS-P
SB 121 TS-P
SB 60 TS-P
SB 81 TS-P
MB 50 EX
MB 70 EX
TNB 6E / 6,5E
TNB 14E / 16E
TNB 4E / 5M
TNB 7E / 10E / 100